Pre-Mixed solvent for paper printing ink

To achieve sharp prints on paper, accurate color reproduction, and optimal production speed, choosing the right solvent for ink dilution is a key factor that every printing business considers, thanks to its convenience and superior efficiency. Especially with K-Chem’s specialized formula, not only can you ensure high-quality print results, but you can also enjoy SPECIAL PRICING this month. This article will walk you through the ready-to-use solvent for paper printing ink by K-Chem from definitions and outstanding features to ingredients, usage instructions, and important storage notes.

What is a ready-to-use solvent for paper printing ink?

Ready-to-use solvents for paper printing ink are pre-formulated chemical compounds used to dilute ink, adjust viscosity, and improve ink adhesion and drying speed on paper surfaces.

Outstanding features of K-Chem’s ready-to-use solvent for paper printing ink

K-Chem’s ready-to-use solvent is developed based on a specialized formula with the following superior properties:

• Excellent solubility: Effectively dissolves ink components to ensure a uniform, non-clumping mixture.
• Optimal viscosity: Helps the ink achieve ideal viscosity for each type of printer, ensuring smooth ink flow without clogging or smudging.
• Enhanced adhesion: Improves ink adhesion on paper, especially coated or low-absorption types like Duplex or Ivory paper.
• Balanced evaporation rate: Suitable for gravure and flexographic printing technologies to prevent the ink from drying too fast (causing clogs) or too slow (causing smudging).
• High purity: Free from impurities, helping to preserve ink quality and protect printing equipment.
• Environmentally friendly: Low toxicity, biodegradable, and reduces impacts on human health and the environment.

Main components in K-Chem’s ready-to-use solvent for paper printing ink

Organic solvents such as NPAC, NPA, EA, IPA, DMC,…. are blended in optimal ratios to enhance ink adhesion and ensure crisp image rendering on paper.

Depending on the printing technology (gravure or flexo), the proportions of these solvents may vary to optimize printing quality.

Contact K-Chem for detailed information about the formulation.

Instructions for using K-Chem’s ready-to-use solvent for paper printing ink

• Check recommendations: Refer to K-Chem’s guidelines to identify the suitable solvent for your printing method.
• Measure accurately: Add K-Chem’s ready-to-use solvent to the ink at a ratio of approximately 15 – 25%.
• Mix thoroughly: Add slowly and stir well to achieve a consistent viscosity.
• Check viscosity: Use a viscosity cup to ensure it meets your printer’s specifications.
• Test print: Conduct a test print to check ink adhesion and print quality.
• Clean equipment: After printing, clean print heads and tools using a suitable cleaning solvent (IPA or Acetone) or K-Chem’s ready-to-use solvent.

Storage Guidelines for K-Chem’s Ready-to-Use Solvent for Paper Printing Ink

Safe Usage:

• Wear gloves, safety goggles, and a mask to avoid skin and eye contact or inhalation of vapor from K-Chem’s ready-to-use solvent for paper printing ink.
• Work in a well-ventilated area with an exhaust system to reduce the risk of inhaling harmful vapors.
• Avoid eating, drinking, or smoking near the solvent storage area.

Storage:

• Store K-Chem’s ready-to-use solvent for paper printing ink in tightly sealed containers, in a dry, cool, and well-ventilated place, away from direct sunlight and heat sources (below 30°C).
• Keep away from flames or ignition sources, as the solvent is flammable.
• Check the expiration date and do not use expired solvent.

Incident Handling:

• In case of skin or eye contact, rinse immediately with clean water and seek medical attention if necessary.
• Dispose of used K-Chem’s ready-to-use solvent according to local environmental regulations to avoid pollution.

K-Chem – Trusted Supplier of Ready-to-Use Solvent for Paper Printing Ink at COMPETITIVE PRICES

In the constantly shifting industrial chemical market, finding a supplier that delivers both high-quality and competitively priced ready-to-use solvent for paper printing ink is no easy task. K-Chem Vietnam proudly stands as a leading provider of optimized solvent solutions for the printing industry, committed to offering premium products at COMPETITIVE PRICES throughout June 2025. These are the key reasons why K-Chem’s ready-to-use solvents are the top choice of many printing businesses:

• Specialized Formula: K-Chem solvents are expertly formulated to optimize every step of the printing process from adhesion and ink smoothness to drying speed making them compatible with various printing technologies.
• Consistent Quality: Through strict production processes, K-Chem guarantees high-purity solvents in every batch, safe for both ink and printing equipment.
• Cost-Effective: Thanks to technological advantages, K-Chem offers highly competitive pricing, especially with special deals available in June 2025 to help businesses reduce operational costs.
• Expert Consultation: K-Chem’s team of specialists is always ready to advise on solvent composition, mixing ratios, and best practices tailored to different inks and printers.

It is clear that ready-to-use solvents for paper printing ink are essential for achieving high-quality, sharp, and durable prints. Choosing the right solvent not only enhances printing efficiency but also protects equipment and improves safety.

With its extensive experience and advanced technology, K-Chem Vietnam is committed to delivering reliable, high-performance solvent solutions. Don’t miss the opportunity to get the BEST DEALS from K-Chem this June to elevate your printing quality and optimize your business costs. Contact K-Chem Vietnam today!

K-CHEM VIETNAM CO., LTD

• Address: N6B Street, Lot F, Phu Chanh 1 Industrial Cluster, Phu Chanh Ward, Tan Uyen City, Binh Duong Province, Vietnam
• Phone: +84 274 362 0218
• Email: info@k-chem.vn